|
| |
Back
Figure 2-11 T/C and Timer Programming (Sheet 2 of 3) | Up
TM-10-1670-302-10 Aerial Resupply and Accompanying Bundle System (ARABS) NSN 1670-01-351-8587 Manual | Next
Initial Programming, Checks, and Self Test - Continued |
2-5. Initial Programming. Checks, and Self Tests.
a.
T/C Programming - Continued
(7)
Press the AUX 6 (ENTR) switch (13). This enters the frequency
(channel) and AGU ID codes into the T/C's memory. Thus, when the
T/C is turned on, the programmed in channel will appear in the
display (4) and the selected AGU's will have their indicator LED's on.
Once the AUX 6 (ENTR) switch is pressed, the blinking AGU LED's
will light continuously and the CHAN LED (5) will also stop blinking.
NOTE
The T/C has now been programmed.
(8)
Set the rotary switch (1) to OFF, then turn it to ON and verify that the
CHANNEL display (4) indicates the correct channel number and that
all of the AGU ID switches previously programmed come on solid
red or solid green - as appropriate.
2-38
|
