|
| |
Back
Table 1. Preventive Maintenance Checks and Services - continued | Up
TM-10-1670-296-20P Ancillary Equipment for Low Velocity Air Drop System (LVADS) Manual | Next
Table 1. Preventive Maintenance Checks and Services - continued |
TM 10-1670-296-20&P 0005 00
0005 00-11
Table 1. Preventive Maintenance Checks and Services – continued
B – Before
D – During
A – After
INTERVAL
ITEM
NO.
B
D
A
ITEM TO BE CHECKED
OR SERVICED
EQUIPMENT NOT READY/
AVAILABLE IF:
11
Parachute Connector.
Inspect connector (1) for
bends, cracks, burrs, and
rough areas. Check if threads
are stripped or cracked.
Check if arms (2) engage into
the retaining clamp. Refer to
WP 0022 00.
Connector (1) has bends, burrs,
or rough areas. Threads are
stripped or cracked. Arms (2)
do not engage into the retaining
clamp.
12
Timer Delay Assembly.
Inspect timer assembly (1) for
bends, cracks, burrs, rough
areas, and foreign material.
Verify any timer delay
assemblies under CAGEC
Code 3N257. If found, refer
to WP 0023 00. Check if
timer activates at the
appropriate time and if stem
(2) rotates freely in mounting
block. Ensure that keys (3)
retract at the end of time
sequence. Refer to WP 0023
00.
Timer assembly (1) has bends,
cracks, burrs, or rough areas or
foreign material is present.
Timer delay assembly is
identified under CAGEC Code
3N257. Timer does not activate
at the appropriate time or stem
(2) does not rotate freely in
mounting block. Keys (3) do
not retract at the end of timing
sequence.
3
2
1
2
|
