|
| |
Back
Table 1. Preventive Maintenance Checks and Services - continued | Up
TM-10-1670-296-20P Ancillary Equipment for Low Velocity Air Drop System (LVADS) Manual | Next
Table 1. Preventive Maintenance Checks and Services - continued |
TM 10-1670-296-20&P 0005 00
0005 00-7
Table 1. Preventive Maintenance Checks and Services - continued
B – Before
D – During
A – After
INTERVAL
ITEM NO.
B
D
A
ITEM TO BE CHECKED
OR SERVICED
EQUIPMENT NOT READY/
AVAILABLE IF:
6
Latch Connector Assembly.
Inspect latch connector assembly
(1) for rough areas, bends, or
cracks. Ensure that threads are
not stripped or damaged. Refer
to WP 0016 00.
Latch assembly connector
has rough areas, bends or
cracks, or foreign material
is present.
7
EFTC Cable Assembly. Inspect
cables prior to every drop by
extending the cable straight.
Check for free movement of inner
cable by separately pulling on
each cable. Inspect both ends of
inner cable for birdcage effect or
damage. Inspect cable (1) for
bends or kinks. Check that cable
moves freely within its cover.
Ensure that cable’s cover is not
broken, that the terminals (2)
operate properly. Ensure that the
adjusting collar set screws (3) is
tight. Inspect yokes (4) for rough
areas, bends, or cracks. Ensure
that shank pins (5) and cotter pins
(6) are present. Refer to WP
0018 00.
When measured with spring
scale, manual force
exceeds 10-lbs. Birdcage
effect is present or damage
to inner cable is evident.
Cable (1) has bends or
kinks. Cable does not
move freely within its cover.
Cable’s cover is broken or
damaged. Terminals (2) do
not operate properly.
Adjusting collar set screws
(3) is loose. Yokes (4) have
rough areas, bends, or
cracks. Shank pins (5) or
cotter pins (6) are missing.
1
|
