|
| |
Back
Table 1. Preventive Maintenance Checks and Services - continued | Up
TM-10-1670-296-20P Ancillary Equipment for Low Velocity Air Drop System (LVADS) Manual | Next
Table 1. Preventive Maintenance Checks and Services - continued |
TM 10-1670-296-20&P 0005 00
0005 00-4
Table 1. Preventive Maintenance Checks and Services - continued
B – Before
D – During
A – After
INTERVAL
ITEM NO.
B
D
A
ITEM TO BE CHECKED
OR SERVICED
EQUIPMENT NOT READY/
AVAILABLE IF:
4 - continued
EFTC 3- Point Link Adapter
Assembly. Ensure the locking
nuts securing the three-point link
are properly adjusted to allow the
cam to rotate freely.
Tighten the three-point link
assembly locking nuts fully and
back off one half turn so the cam
and spools rotate freely.
Check for the proper engagement
of the cam with an open latch
assembly. The cam must fit
without interference and seat
properly into the latch assembly
when the latch is manually
relocked and the dot and arrow are
aligned.
NOTE
If different cams are tried and
none will engage and seat
properly in the latch, the latch
shall be tagged “defective-latch”
and set aside. Refer to WP
0015 00.
See previous.
1
|
