Table 1. Preventive Maintenance Checks and Services

TM 10-1670-296-20&P 0005 00 0005 00-3 Table 1. Preventive Maintenance Checks and Services - continued B – Before D – During A – After INTERVAL ITEM NO. B D A ITEM TO BE CHECKED OR SERVICED EQUIPMENT NOT READY/ AVAILABLE IF: 3 EFTC Link Adapter Assembly. Inspect link assembly adapter (1) for rough areas, bends, or cracks. Ensure that threads (2) are not stripped or damaged. Refer to WP 0014 00. Link assembly adapter (1) has rough areas, bends, or cracks. Threads (2) are stripped. 4 EFTC 3- Point Link Adapter Assembly. Check each link assembly (three point) for proper parts and assembly. Check assembly (1) operation. Inspect for excessive wear, bends, breaks, or weld separation. Check for proper orientation of the cam with the extraction and deployment line for the load. NOTE The cam may be reoriented by loosening the locking nut, removing the pin and reinserting the cam in the desired orientation. Assembly (1) is inoperable or has excessive wear, bends, breaks, or weld separation. Cam does not rotate freely. Cam does not properly engage with an open latch assembly, dot and arrow are misaligned.