Installing Attaching Tie

TM 10-1670-296-20&P 0003 00 0003 00-3 Once initiated, a log record will be attached to and contained on the item until such time as the item is destroyed or rendered unfit for further use or repair. Additionally, should an item that requires a log record be transferred from one unit to another, the log record for the item will accompany the item in the transfer action. A prepared log record will not be removed or separated from the item, except as directed by the local airdrop equipment maintenance activity officer. A log record which is illegible, lost, damaged, soiled, or precludes further entries due to lack of space will be replaced upon the next repack or inspection, as applicable, with a serviceable item from stock. Installing Attaching Tie. Install attaching tie as follows: 1. Cut a 30-inch length of tape, lacing and tying waxed nylon thread (Item 28, WP 0125 00) and double the lacing length to form a 15-inch length, double strand. 2. Pass looped end of the double lacing length around the centerfold of the log record and form a slip loop on the outside at the log record top. 3. Pass lacing length running ends through the corner attaching hole from the front cover of log record book.