|
| |
Back
Single Knife Parachute Release Strap | Up
TM-10-1670-296-20P Ancillary Equipment for Low Velocity Air Drop System (LVADS) Manual | Next
10K Cargo Tie-down |
TM 10-1670-296-20&P 0002 00
0002 00-10
M-35 Suspension Bracket. The M-35 suspension bracket is secured to the rear frame on the M-34, M-35,
M-35A1, and M-36C 2 ½-ton (2,300-kg) truck for airdrop. It is used as an attaching point for the suspension
slings to the rigged load. The assembly consists of a left and a right side plate (1), two 5/8-inch hexagon cap
bolts (2), two 5/8-inch lock washers (3), and two 5/8-inch hexagon nuts (4).
M-59 Suspension Bracket. The M-59 suspension bracket is secured to the rear frame on the M-59, 2 ½-
ton (2,300-kg) drum truck for airdrop. It is used as an attaching point for the suspension slings to the rigged
load. It consists of the same components used in the M-35 suspension bracket described above.
Suspension Plate. The suspension plate is secured to the wheel of the M-114A1, 155-mm howitzer for
airdrop. It has a clevis pinhole (1) for attaching the steel clevis block assembly.
|
