|
| |
Back
Type IV Link Cover | Up
TM-10-1670-296-20P Ancillary Equipment for Low Velocity Air Drop System (LVADS) Manual | Next
Single Knife Parachute Release Strap |
TM 10-1670-296-20&P 0002 00
0002 00-8
1 1/8-inch (2.9-cm) Screw Pin Clevis. The screw pin clevis (1) that has a screw-pin (2) and 2-inch
diameter sleeve (3) instead of a bolt and nut. It is used as an attachment for suspension sleeves.
NOTE
The only screw pin clevises authorized for use are the ones
manufactured after January 1984. These clevises can be identified by
their zinc chromate finish, which has a lustrous silver color.
Clevis Cover. The clevis cover is made of type II cotton duck with a type VII cotton webbing (1)
reinforcement and three brass grommets (2). The cover has a slot cut in the closed end to allow passage of
the suspension slings. Grommets near the mouth of the cover permit tying the cover around the
suspension clevis bolt and nut.
.
|
