|
| |
Back
T-10C/T-10D TROOP BACK PARACHUTE ASSEMBLY ASSEMBLING THE T-10C/T-10D TROOP BACK PARACHUTE | Up
TM-10-1670-293-23P Parachute Personnel Type: 35-Foot Diameter T-10C Troop Back Parachute Assembly NSN 1670-01-248-9502 Manual | Next
T-10C/T-10D TROOP BACK PARACHUTE ASSEMBLY ASSEMBLING THE T-10C/T-10D TROOP BACK PARACHUTE CONT. |
TM 10-1670-293-23&P
0004 00
c. Secure the pull-dot snap fasteners.
d. Secure both pack tray horizontal back-strap-keepers over the horizontal back-strap, as
illustrated in the figure above.
2. Risers. Attach the risers to the T-10C/T-10D harness as follows:
a. Lay parachute, harness down, with female fittings of harness near male fittings of risers.
b. Fit heel of male fitting into groove of female fitting.
c. Fit toe of male fitting into slot of female fitting, close latch. Ensure that the latch is securely
locked.
Change 1
0004 00-2
|
