|
| |
Back
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued | Up
TM-10-1670-292-23P Parachutes Personnel Type: 35-Foot Diameter MC1-1C Troop Back Parachute Assembly NSN 1670-01-262-2359 Manual | Next
UNIT MAINTENANCE MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY SHAKEOUT AND AIRING |
TM 10-1670-292-23&P 0006 00
0006 00-6
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued
B – Before
D – During
A - After
INTERVAL
ITEM
NO.
B
D
A
ITEM TO BE
INSPECTED
PROCEDURES
06
*
*
Standard
Static Line &
Static Line
Extension –
Continued
Snap Hook. Inspect for proper operation, excessive
wear, rust, burrs, corrosion, and cracks. Verify that
proper hole has been drilled.
Safety Pin. Inspect for rust, corrosion, breaks, and
twists.
Safety Pin Lanyard. Inspect for proper ties, frays,
thin spots and breaks.
07
*
*
Universal Static
Line (USL)
Webbing. Inspect for loose or broken stitching,
holes, line extension tears, burns or frays.
Static line webbing with minor abrasions are
serviceable. Minor Abrasions are visible on the
surface of the USL webbing and will appear to look
“fuzzy”.
Minor Abrasion.
Static line webbing with major abrasions are
unserviceable. Major abrasions are visible when
inner core fibers are pulled through the surface of
the webbing.
Major Abrasion.
Sleeve and Buffer. Inspect for loose or broken
stitching, holes, tears, burns or frays. Inspect entire
portion of static line covered by sleeve.
Pack Opening Loop. Inspect for loose or broken
stitching, burns, tears or frays.
Snap Hook. Inspect for proper operation, excessive
wear, rust, burrs, corrosion, and cracks.
LUBRICATION SERVICE INTERVALS
MC1-1C/MC1-1D Troop Back Parachute Assemblies do not require lubrication service.
END OF WORK PACKAGE
|
