|
| |
Back
MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY ASSEMBLING THE MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY | Up
TM-10-1670-292-23P Parachutes Personnel Type: 35-Foot Diameter MC1-1C Troop Back Parachute Assembly NSN 1670-01-262-2359 Manual | Next
MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY ASSEMBLING THE MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY CONT. |
TM 10-1670-292-23&P
0004 00
0004 00-2
c. Secure both pack tray horizontal back-strap-retainers over the horizontal back-strap, as
illustrated on the previous page.
d. Secure the pull-dot snap fasteners.
2. Risers. Attach the risers to the MC1-1C/MC1-1D harness as follows:
a. Lay the parachute harness down, with the female fittings of the harness near the male fittings
of the risers.
b. Fit heel of male fitting into groove of female fitting.
c. Fit toe of male fitting into slot of female fitting, close latch, and ensure the latch is securely
locked.
Toe
|
