Accomplishing a Log Record

TM 10-1670-292-23&P 0003 00 0003 00-5 7. Remove the lacing end from the tacking needle; make a finished 10-inch-long log record attaching loop by securing the two lacing ends together with an overhand knot. 8. Insert the log record into the pocket and secure the record within the pocket using the pocket flap and applicable type flap fastener. Accomplishing a Log Record. Upon completion of the first technical/ rigger-type inspection, the individual performing the inspection will initially prepare a log record for an individual parachute, or applicable type parachute harness, and accomplish subsequent record entries using the following procedures: NOTE Log record book entries will be made with a suitable type blue or black marking device that cannot be erased (no felt tip markers). 1. Inside Front Cover. Using the information provided on the parachute canopy data block, make the following entries on the inside front cover of the log record. Entries may be continued on the inside of the back cover, if necessary.