|
| |
Back
RIPCORD GRIP TEST CONT. | Up
TM-10-1670-287-23P MC-4 RAM Air Free-Fall Personnel Parachute System NSN 1670-01-306-2100 Manual | Next
ATTACHMENT OF RISERS TO HARNESS/CONTAINER CONT. |
TM 10-1670-287-23&P
0006 00
0006 00-6
ATTACHMENT OF RISERS TO HARNESS/CONTAINER
Attach risers to harness/container as follows:
1. Insert main ripcord cable through main ripcord housing. Insert main ripcord grip into ripcord grip
pocket. Insert single point release cable through cable housings. Mate hook tape on grip with pile
tape on harness. Attach reserve static line to container with reserve static line pull ring facing top of
container. Pass reserve ripcord cable through reserve static line pull ring and then through reserve
static line guide ring.
2. Position right riser on harness above main ripcord and pass large ring on riser through base ring of
three ring release.
Reserve
Static Line
Pull Ring
Main Canopy
Release Ripcord
Housing
Main Ripcord
Release
Ripcords
Reserve
Ripcord
Grip
Ripcord
Main
Release
Reserve Static Line
Base Ring of 3 Ring Release
Large Riser Ring
|
