|
| |
Back
INSTALLATION OF SAFETY STOW; ELASTIC LOOP IN DEPLOYMENT BAG CONT. | Up
TM-10-1670-287-23P MC-4 RAM Air Free-Fall Personnel Parachute System NSN 1670-01-306-2100 Manual | Next
INSTALLATION OF SAFETY STOW; ELASTIC LOOP IN DEPLOYMENT BAG CONT. |
TM 10-1670-287-23&P 0005 00
0005 00-17
o. Grasp canopy fabric near lines 1C and 1D attachment points. Moving to center of canopy, stretch
and compare lengths. Line 1D should be 12-inches (± 1-inch) longer than line 1C.
p. Move to the trailing edge of the canopy and ensure connector links are held even with one
another and remove toggle thong from finger trap loop.
q. Locate lines 1D and 8D.
NOTE
Pull both lines evenly before looking at the ruler to ensure an
accurate measurement can be obtained. Adjust knot at the toggle
to obtain correct length.
12 ± 1-IN.
Line 1C
Line 1D
|
