ATTACHMENT OF CANOPY TO RISERS CONT.

TM 10-1670-287-23&P 0005 00 0005 00-7 d. Secure the risers to a suitable anchor point. e. Starting from the risers (rigger view), check to ensure the right and left risers are attached to the correct side. f. Check each riser to ensure the 3-ring assembly is facing down. g. Trace each riser up to the connector link and ensure each barrel nut faces inboard and closes upward toward the canopy. h. Check the slider to ensure the reinforcement webbing is facing the canopy and the arrow is facing down. NOTE During the process of tracing each control line/cascade line, half twists are acceptable. i. Check each control line to ensure it is not misrouted by following the base line of the control line from the canopy-attaching loop down to the toggle. Risers Slider Suspension Device Clamps