LOCATION AND DESCRIPTION OF MAJOR COMPONENTS CONT.

TM 10-1670-287-23&P 0002 00 0002 00-9 b. Harness. The harness is constructed of Type VII nylon webbing, and is an integral part of the container. The harness includes eight adjustment points: two (2) leg connector snaps and six (6) adjusting adapters. Four (4) accessory attachment rings, one (1) each on the upper and lower lift webs, are used to accommodate rucksacks, containers, and weapons. The reserve canopy attaches to the reserve risers. The risers feature control line guide rings and covers for the control lines. The right and left lift webs serve as attachment locations for the main and reserve ripcord pockets. Also located on the lift webs are the base rings of the three-ring release assembly. These rings are used for attachment/release of the main parachute. Chest Strap Leg Strap Equipment D-Ring Reserve Ripcord Cable Housing Waistband Reserve Ripcord Pocket Base Ring of Three-Ring Release Assembly Static Line Guide Ring Reserve Risers Main Canopy Release Ripcord Cable Housing Main Canopy Release Ripcord Pocket Main Ripcord Cable Housing Main Ripcord Pocket Waistband