Figure 9. Top Panel in Place for Closing Extraction Line Bag

TM 10-1670-286-20 EXTRACTION LINE PANEL 0009 00 STOWING 140-FOOT THREE LOOP EXTRACTION LINE TO EXTRACTION LINE PANEL 0009 00-11 NOTE Insure that the extraction line stows do not shift out of position. c. Cut one 95-inch length of ½-inch wide tubular nylon webbing. Cut one 95-inch and six 10 inch lengths of ¼-inch wide type I cotton webbing to be used as bag closing ties. Figure 9. Top Panel in Place for Closing Extraction Line Bag. d. Beginning at lower left corner of panels, secure one end of 95-inch nylon webbing closing tie to lacing loops located on outside edge of top and bottom panels with three alternating half-hitches and an overhand knot in running end (figure 10). e. Using running end of attached 95-inch nylon webbing bag closing tie, lace lower end of panels closed, working from bottom to top, from left to right, forming half-hitches between closing loops. Secure end of closing tie with three alternating half-hitches and overhand knot in running end. Trim off excess.