|
| |
Back
Figure 5. Extraction Line Stowed | Up
TM-10-1670-286-20 Extraction Line Panel NSN 1670-01-183-2678 Manual | Next
Figure 7. Handling Tie Installed |
TM 10-1670-286-20
EXTRACTION LINE PANEL 0007 00
STOWING 60 FOOT SIX LOOP EXTRACTION LINE TO EXTRACTION LINE PANEL
0007 00-7
d. Using running end of attached 95-inch nylon webbing bag closing tie, lace lower end of panels closed,
working from bottom to top, from left to right, forming half hitches between closing loops. Secure end of
closing tie with three alternating half-hitches and overhand knot in running end. Trim off excess.
e. Secure top and bottom closing loops together on left and right sides with six 10-inch cotton webbing bag
closing ties. Secure surgeon’s knot and locking knot.
NOTE
This tie for handling and transport only. Remove aboard aircraft.
Figure 6. Extraction Line Bag Closed.
f. Beginning at upper top center bridle attaching loops, pass one end of 95-inch cotton webbing bag
closing tie (temporary tie) through top center, bottom right, top right, bottom center, top left, bottom left,
and back through top center loops. Remove slack from tie and secure ends with surgeon’s knot and
locking knot (figure 7).
|
