|
| |
Back
Figure 4. S-Fold of Extraction Line | Up
TM-10-1670-286-20 Extraction Line Panel NSN 1670-01-183-2678 Manual | Next
Figure 6. Extraction Line Bag Closed |
TM 10-1670-286-20
EXTRACTION LINE PANEL 0007 00
STOWING 60 FOOT SIX LOOP EXTRACTION LINE TO EXTRACTION LINE PANEL
0007 00-6
Figure 5. Extraction Line Stowed.
3. Close Extraction Line Bag.
a. Place top panel on bottom panel and align edges.
NOTE
Insure that the extraction line stows do not shift out of position.
b. Cut one 95-inch length of ½-inch wide tubular nylon webbing. Cut one 95-inch and six 10-inch lengths
of ¼-inch wide type I cotton webbing to be used as bag closing ties.
c. Beginning at lower left corner of panels, secure one end of 95-inch nylon webbing bag closing tie to
lacing loops located on outside edge of top and bottom panels with three alternating half-hitches and
over hand knot in running end (figure 6).
|
