TM 10-1670-286-20 EXTRACTION LINE PANEL                                                                                                                          0002 00 UNIT MAINTENANCE INSTRUCTIONS FOR EXTRACTION LINE PANEL 0002 00-4 Table 1.  Unit Preventive Maintenance Checks and Services B-Before use D-During use A-After use ITEM NO. INTERVAL B       D       A ITEMS TO BE   INSPECTED PROCEDURES CHECK FOR AND HAVE SERVICED AS NECESSARY 1 2 3 4 5 6 X X X X X                    X X                     X X                    X X                     X Body Reinforcement Strap Tie Strap Strap Handle Closing Strap Closing Loop Check for cuts, burns, abrasions, broken or missing   stitches.  If any defects are found, replace   Extraction Line Panel. Check for foreign substance.  If any foreign substance   is found, clean as directed in WP 0003 00.       Check for illegible or missing identification markings (Figure 1) which are part number, manufacture’s   name and date of manufacture.  Stencil or mark   identification markings as required in WP 0004 00. Check the three reinforcement straps for cuts, burns abrasions, broken or missing stitches and from loops at each end of each strap.  If any defects are found,   replace Extraction Line Panel. Check for foreign substance.  If any foreign substance   is found, clean as directed in WP 0003 00. Check the three tie straps for cuts, burns, abrasions, broken or missing stitches and torn loops.  There are   twelve loops in each tie strap.  If any defects are   found, replace Extraction Line Panel.    Check for foreign substance.  If any foreign substance   is found, clean as directed in WP 0003 00. Check the four strap handles for cuts, burns, abrasions, broken or missing stitches.  If any defects are found, replace Extraction Line Panel. Check for foreign substance.  If any foreign substance   is found, clean as directed in WP 0003 00. Check the two closing straps for cuts, burns, abrasions, broken or missing stitching and torn loops. There are twenty-four loops in each closing straps.  If any defects are found, replace Extraction Line   Panel.  Check for foreign substance.  If any foreign   substance is found, clean as directed in WP 0003 00. Check the six closing loops for cuts, tears, burns, abrasions, broken or missing stitching.  If any defects   are found, replace Extraction Line Panel. Check for foreign substance.  If any foreign substance   is found, clean as directed in WP 0003 00.