Section II. EQUIPMENT DESCRIPTION AND DATE

TM 10-1670-286-20 EXTRACTION LINE PANEL 0001 00 GENERAL INFORMATION 0001 00-4 NOMENCLATURE CROSS-REFERENCE LIST. Common Name Official Nomenclature Extraction Line Bag Stow Loop Extraction Line Panel Tie Strap Bridle Attaching Loop or Bag Closing Loop Reinforcement Strap Loop Section II. EQUIPMENT DESCRIPTION AND DATE EQUIPMENT CHARACTERISTICS. Universal panel that stows extraction lines and suspension slings for deployment. One or two panels are required depending upon their application. CAPABILITIES AND FEATURES a. Accommodates extraction line and suspension slings. b. Portable. c. Used with all approved extraction line for C-130, C-141, C-5 and C-17 Aircraft. d. Various applications. (1) One panel (half bag) when stowed for low velocity airdrops. (2) Two panels (full bag) when stowed for low velocity airdrops. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (figure 2). BODY (1). Forms the panel body and is constructed of nylon duck cloth. Strap and closing loops are stitched to it. REINFORCEMENT STRAP (2). Three reinforcement straps are used. One is located in the center and outside on the body, and one each is located 3 ½-inches from each side, on the outside of the body. TIE STRAP (3). Three tie straps are used. One is located in the center and inside of the body, and one each is located 3 ½-inches from each side, on the inside of the body. STRAP HANDLE (4). Four strap handles are used to carry the panel. Two are located at each side, on the outside of the body 3 ½-inches from each end. CLOSING STRAP (5). Two closing straps are used, one at each end of the body on the outside. CLOSING LOOP (6). Six closing loops are used. Three are located at each side on the outside of the body. One on each side is located 3 ½-inches from the forward end. One on each side is located 20 ½-inches from either end. One on each side is located 4-inches from the aft end.