Arming the reefing line cutters.

TM 10-1670-280-23&P 0011 00 0011 00-27 10. Arming the reefing line cutters. NOTE The following procedures are for using a G-11 Cotton Deployment Bag. If using a nylon deployment bag, proceed to the ARMING THE REEFING LINE CUTTERS paragraph below. a. Position the four reefing line cutters on top of the stowed canopy with the cutter at suspension line 61 placed adjacent to the bag double grommet on the bag bottom, the cutter at suspension line 31 placed adjacent to the grommet on the left side of the deployment bag, the cutter at suspension line 91 adjacent to the grommet on the right side of the deployment bag and the cutter at suspension line 1 placed adjacent to the bag single grommet on the bag top. b. Cut four 12-inch lengths of type III nylon cord for use as arming cable ties. c. Beginning with the reefing line cutter at line 1 near the bag top, pass the end of one cord through the hole in the top of the reefing line cutter arming cable and through the bag single grommet to the outside. d. Pass the other end of the cord over the top of the bag edge and draw the cord ends tight. e. Secure the cord ends on the bag outside with a surgeon’s knot and locking knot. f. Make an overhand knot in each running end. Cutter at Suspension Line 1 Cutter at Suspension Line 61 Cutter at Suspension Line 31 Locking Stow Loop Locking Stow Loop Cutter at Suspension Line 91