|
| |
Back
PREPARING PARACHUTE FOR PROPER LAYOUT | Up
TM-10-1670-280-23P Parachute Cargo Type: 100-Foot Diameter Model G-11B G-11C and G-11D NSN 1670-01-016-7841 Manual | Next
REMOVING TURNS, TANGLES AND TWISTS FROM SUSPENSION LINES |
TM 10-1670-280-23&P 0011 00
0011 00-4
3. Grasp the bridle loop and pull the canopy vent down through the canopy skirt between two adjacent
suspension lines.
4. On the outside of the canopy, pull the canopy vent back to the stationary post. Attach the bridle loop to
the stationary post.
LOCATING SUSPENSION LINES IN PROPER LAYOUT
To properly locate suspension lines, proceed as follows:
1. Locate the top center gore of the canopy and divide the suspension lines into two groups, Lines 1 through
60 in the left group and lines 61 through 120 in the right group.
2. Maintain group separation by moving from the skirt of the canopy towards the suspension risers,
removing turns, tangles and twists from the two groups.
|
