• Chapter 1 Introduction
• Figure 1-1. 22-Foot Diameter, Cargo Extraction Parachute, Deployed
• Preparation For Storage Or Shipment
• Reporting Of Equipment Improvement Recommendations (Eir)
• Figure 1-2. Canopy Assembly And Adapter Web.
• Figure 1-3. Extraction Line
• Figure 1-4. Deployment Bag.
• Equipment Data (Cont)
• Safety, Care, And Handling
• Chapter 2 Unit And Intermediate Direct Support (Ds) Maintenance Instructions
• Section Ii. Service Upon Receipt
• Figure 2-1. Installing Attachment Tie On Parachute Log Record
• Figure 2-2. Inside Front Cover Of Parachute Log Record
• Figure 2-4. Log Record Entries For The Modification Work Order Compliance Record Page.
• Figure 2-5. Log Record Entries For Unit And Intermediate Repair And Inspection Data Page
• Checking Unpacked Equipment After Shipment
• Section Iii. Assembly
• Section Iv. Preventive Maintenance Checks And Services (Pmcs)
• Table 2-1. Unit And Intermediate Direct Support (Ds) Preventive Maintenance Checks And Services (Pmcs)
• Table 2-1. Unit And Intermediate Direct Support (Ds) Preventive Maintenance Checks And Services (Pmcs) (Cont)
• General Information
• Shakeout And Airing
• Figure 2-8. Shakeout
• Cleaning And Drying
• Cleaning Fabric Items With Cleaning Solvent
• Cleaning And Drying (Cont)
• Cleaning And Drying (Cont)
• Inspection
• Inspection Cont.
• Inspection (Cont)
• Acidity Test
• Salt-Water Contamination Test
• Packing The 22-Foot Cargo Extraction Parachute
• Packing The 22-Foot Cargo Extraction Parachute (Cont)
• Figure 2-9. Rigger’s Orientation
• Figure 2-10. Canopy Attached To Packing Table Apex Hook
• Figure 2-11. Removing Inversion
• Figure 2-12. Removing Partial Inversion
• Figure 2-13. Removing Turns From Suspension Lines
• Figure 2-14. Removing Tangles From Suspension Lines
• Figure 2--15. Removing Twists From Suspension Lines
• Figure 2--16. Line 1 And 28/14 And 15 Checked At Connector Link
• Figure 2-17. Dressing The Apex
• Figure 2-18. Flipping Right Group Of Gores.
• Figure 2-19. Folding Right Gore Group
• Figure 2-20. Left Gore Group Fold Complete
• Figure 2-22. Flat Fold Complete
• Packing The 22-Foot Cargo Extraction Parachute (Cont)
• Attaching Deployment Bag.
• Figure 2-24. Attaching Bridle Loop To Deployment Bag
• Packing The 22-Foot Cargo Extraction Parachute (Cont)
• Figure 2-25. Stowing Canopy
• Figure 2-26. Stowing Suspension Lines.
• Figure 2-27. Suspension Line Connector Link Assemblies In Position With Adapter Web
• Figure 2-28. Suspension Line Stowage Flap Rolled Into Open End Of Deployment Bag
• Figure 2-29. Left And Right Deployment Bag Closing Ties.
• Figure 2-30. Bag Opening Safety Loop And Pendulum Line Secured.
• Figure 2-31. Stowing The Extraction Line
• Section Vi. Repair
• Repair - Sewing Procedures
• Table 2-2. Sewing Machine Code Symbols
• Table 2-3. Stitching And Restitching Specifications (Cont)
• Repair - Sewing Procedures (Cont)
• Figure 2-32. Darning Method Using A Darning Sewing Machine.
• Searing And Waxing
• Marking And Restenciling
• Parachute Canopy
• Attachment Loop. (Bridle Loop)
• Figure 2-34. Attachment Loop Replacement Details
• Vent Lines
• Figure 2-35. Vent Line Replacement Details.
• Bridle Centering Line
• Figure 2-36. Bridle Centering Line Details.
• Vent Reinforcement Band (Upper Lateral Band)
• Vent Reinforcement Band (Upper Lateral Band) (Cont)
• Figure 2-37. Vent Reinforcement Band Splicing Details
• Gore Section
• Gore Section Cont.
• Gore Section (Cont)
• Figure 2-38. Basic And Miscellaneous Patch Application
• Gore Section (Cont)
• Figure 2-39. Gore Panel Replacement Details
• Radial Tape
• Figure 2-40. Radial Tape Restitching Details.
• Figure 2-41. Radial Tape Splice Details.
• Panel Edge Reinforcement
• Figure 2-42. Panel Edge Reinforcement Splicing Details
• Skirt Reinforcement (Lower Lateral Band)
• Figure 2-43. Skirt Reinforcement Splice Details (Lower Lateral Band)
• Pocket Band
• Figure 2-44. Webbing Type Pocket Band Replacement Details
• Figure 2-45. Cord Type Pocket Band Replacement Details
• Suspension Line
• Figure 2-46. Replacement Suspension Line Construction Details
• Figure 2-47. Securing Suspension Line At Suspension Line Attaching Loop
• Figure 2-48. Suspension Line Numerical Sequence
• Figure 2-49. Securing Suspension Line To Connector Link
• Suspension Line Spacer
• Connector Link
• Figure 2-51. Connector Link Assembly
• Deployment Bag
• Figure 2-52. Deployment Bag
• Grommet
• Figure 2-53. Fabricating Grommet Reinforcement
• Figure 2-54. Grommet Installation By Hand-Held Method.
• Figure 2-55. Chuck And Die Installed In Hand-Operated Press
• Figure 2-56. Flat Grommet Installation By Hand- Or Foot-Operated Press, Typical.
• Deployment Bag Retainer Band Keeper
• Figure 2-57. Retainer Band Keeper Replacement
• Deployment Bag Retainer Band Keeper
• Figure 2-58. Replacement Retainer Line Construction Details
• Figure 2-59. Deployment Bag Retainer Line Replacement Details
• Deployment Bag Closing Loop
• Figure 2-60. Closing Loop Replacement Details.
• Inspection Data Pocket
• Figure 2-61. Attaching Parachute Inspection Data Pocket
• Deployment Bag Retainer Band Keeper Reinforcement
• Figure 2-62. Retainer Band Keeper Reinforcement Replacement Details.
• Deployment Bag Tie Loop And Tie Loop Reinforcement
• Figure 2-63. Tie Loop And Tie Loop Reinforcement Replacement.
• Deployment Bag Safety Cord
• Figure 2-64. Safety Cord Fabrication Details.
• Figure 2-65. Safety Cord Replacement Details.
• Deployment Bag Stowage Flap Edge Binding
• Figure 2-66. Edge Binding Splicing Detail
• Deployment Bag Stowage Flap Edge Reinforcement
• Figure 2-67. Stowage Flap Edge Reinforcement Details
• Deployment Bag Main Strap.
• Deployment Bag Panels And Flaps
• Figure 2-68. Patching Deployment Bag Panels And Flaps.
• Deployment Bag Pendulum Line.
• Figure 2-69. Replacement Pendulum Line Construction Details
• Figure 2-70. Pendulum Line Replacement Details
• Foot Long Adapter Web
• 5-Foot Long Adapter Web Body.
• 5-Foot Long Adapter Web Long Buffer
• Figure 2-71. Long Buffer Replacement Details
• Extraction Line (60-Foot Long)
• Type Iv Quick Release Link Assembly
• Figure 2-72. Type Iv Quick Release Link Assembly Repair
• Storage
• In-Storage Inspection
• Appendix A References
• Appendix B Maintenance Allocation Chart Section I. Introduction
• Maintenance Functions (Cont)
• Explanation Of Columns In Tool And Test Equipment Requirements, Section Iii.
• Maintenance Allocation Chart For 22 Foot Diameter Cargo Extraction Parachute Assembly (Cont)
• Maintenance Allocation Chart For 22 Foot Diameter Cargo Extraction Parachute Assembly (Cont)
• Section Iii. Tool And Test Equipment Requirements
• Section Iii. Tool And Test Equipment Requirements (Cont)
• Appendix C Repair Parts And Special Tools List Section I. Introduction
• Explanation Of Columns (Sections Ii And Iii) (Cont)
• Maintenance Code
• Explanation Of Columns (Sections Ii And Iii) (Cont)
• Part Number (Column
• Explanation Of Columns (Sect. Iv)
• Special Information
• Abbreviations
• Figure C-1. 22-Foot Diameter Cargo Extraction Parachute.
• Section Ii. Repair Parts List
• Figure C-2. 22-Foot Diameter Canopy, Cargo Extraction Parachute
• Group 01 Canopy, Cargo Extraction Parachute, 22-Foot Diameter
• Figure C-3. Deployment Bag
• Group 02 Deployment Bag, Parachute
• Fig. C-4 5-Foot Adapter Web
• Group 03 Adapter Web, Extraction Parachute
• Group 05 Bulk Materials
• Cross-Reference Indexes National Stock Number Index
• Cross-Reference Indexes Part Number Index
• Appendix D Expendable/Durable Supplies And Materials List
• Expendable/Durable Supplies And Materials List (Cont)
• Expendable/Durable Supplies And Materials List (Cont)
• Expendable/Durable Supplies And Materials List (Cont)
• Appendix E Illustrated List Of Manufactured Items
• Index
• Index (Cont)
• Index (Cont)
• Index (Cont)
• The Metric System And Equivalents

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing