|
| |
Back
Figure 2--15. Removing Twists from Suspension Lines | Up
TM-10-1670-279-23P Parachute Cargo Type: 22-Foot Diameter Cargo Extraction Parachute NSN 1670-01-063-3716 and NSN 1670-00-687-5408 Manual | Next
Figure 2-17. Dressing the Apex |
ARMY TM 10-1670-279--23&P
AIR FORCE T.O. 13C5-27--2
NAVY NAVAIR 13-1-28
PIN: 066622--003
2--34 Change 3
2--16. Packing 22-Foot Cargo Extraction Parachute (cont.)
2 Remove twist by rotating adapter web until lines are in proper location on connector links.
(4)
Check suspension lines for proper layout (figure 2-16). Lines 1 and 28 WILL BE inside of top connector
links. Lines 14 and 15 WILL BE be outside bottom of connector links.
(5)
Parchute is now in proper layout.
NOTE
Before proceeding to pack the parchute (NSN 1670-00-687-5458), The type X
extraction line should be inspected for damage. If the extraction line is damaged,
the type X adapter web will be removed and a type XXVI adapter web will be
installed. When this is accomplished, the NSN for the 22-foot-diameter cargo
extraction parachute will be changed to 1670-01-063-3716.
Figure 2--16. Line 1 and 28/14 and 15 Checked at Connector Link.
g.. Attaching and Stowing Deployment Bag Retaining Tie. Attach and stow retaining tie following the procedures
in paragraph 2-8.
|
