|
| |
Back
Section II. SERVICE UPON RECEIPT | Up
TM-10-1670-279-23P Parachute Cargo Type: 22-Foot Diameter Cargo Extraction Parachute NSN 1670-01-063-3716 and NSN 1670-00-687-5408 Manual | Next
Figure 2-2. Inside Front Cover of Parachute Log Record |
ARMY TM 10-1670-279-23&P
AIR FORCE T.O. 13C5-27-2
NAVY NAVAIR 13-1-28
e.
Installing Attaching Tie. Install attaching tie as follows:
(1)
Cut a 30-inch length of ticket No. 8/7 waxed cotton thread (Item 25, Appendix D) and double thread length to
form a 15-inch length, double strand.
(2)
Pass looped end of doubled thread length around centerfold of log record and form a slip loop on outside at
log record top (A, figure 2-1).
(3)
Pass thread length running ends through corner attaching hole from front cover of log record (B, figure 2-1)
and ensure running ends are routed over that part of thread length located along log record centerfold (C,
figure 2-1).
(4)
Complete attachment tie by making a half hitch on top of slip loop made in (2) above.
(5)
Thread one running end of the log record attachment tie in a tacking needle and pass tacking needle with
attached thread end through the edge binding of the applicable parachute log record/inspection data pocket.
(6)
Remove thread end from tacking needle and make a finished 10-inch long log attaching loop by securing two
thread ends together with an overhand knot.
(7)
Insert log record into the pocket and secure the record within pocket using pocket flap and applicable type
flap fastener.
Figure 2-1. Installing Attachment Tie on Parachute Log Record.
2-3
|
