|
| |
Back
Figure 2-12. Removing Partial Inversion | Up
TM-10-1670-278-23P Parachute Cargo Type: 15-Foot Diameter Cargo Extraction Parachute NSN 1670-01-063-3715 and NSN 1670-00-062-1648 Manual | Next
Figure 2-14. Removing Tangles from Suspension Lines |
ARMY TM 10-1670-278-23&P
AIR FORCE T.O. 13C5-26-2
NAVY NAVAIR 13-1-27
Figure 2-13. Removing Turns from Suspension Lines.
1 Remove connector links from tension plate and remove a turn by rotating risers in direction
opposite to direction of turn.
2 Reposition connector links on tension plate.
(b) Tangles. To remove a tangle, or tangles, keep the two groups of lines separated and work the
tangle, or tangles, as close to the connector links as possible. Detach connector links from the
tension plate.
1 Select top line, or lines that form the tangle and, with left hand, lift line, or lines, away from other
lines (figure 2-14).
2 Reach through opening, created by lifting the suspension lines, with right hand (figure 2-14) and
pull adapter web or extraction line through opening (figure 2-14). Do not permit risers to turn.
3 Replace connector links on tension plate.
2-29
|
