|
| |
Back
Figure 2-1. Installing Attachment Tie on parachute Log Record | Up
TM-10-1670-278-23P Parachute Cargo Type: 15-Foot Diameter Cargo Extraction Parachute NSN 1670-01-063-3715 and NSN 1670-00-062-1648 Manual | Next
Figure 2-4. Log Record Entries for the Modification Work Order Compliance Record Page |
ARMY TM 10-1670-278-23&P
AIR FORCE T.O. 13C5-26-2
NAVY NAVAIR 13-1-27
2-4. Initial Receipt (cont).
f.
Accomplishing a Log Record. Upon completion of the first technical/rigger-type inspection, the Individual
performing the inspection will initially prepare a log record for an individual parachute or applicable type parachute
harness and accomplish subsequent record entries using the following procedures:
NOTE
Log record book entries will be made with a suitable type blue or black marking device that
cannot be erased.
(1)
Inside front cover. Using the information provided on the parachute canopy data block, make the
following entries on the inside front cover of the log record (figure 2-2). Entries may be continued on
the Inside of the back cover, if necessary.
(a)
Serial number. Enter the parachute canopy assembly serial number.
NOTE
A parachute canopy serial number is recorded in a log record as a method of establishing control
for maintenance, EIR documentation, and to insure the correct original record Is reattached
should the record become detached. A canopy serial number will not be used for property
accountability, except in test projects or other special instances.
Figure 2-2. Inside Front Cover of Parachute Log Record.
(b)
Type. Enter the parachute type.
(c)
Part number. Enter the part number of the parachute canopy.
(d)
Date of manufacture. Enter the month and year the parachute canopy was manufactured.
(e)
Manufacturer. Enter the name of the parachute canopy manufacturer.
2-4
|
