|
| |
Back
UNIT MAINTENANCE 28-FOOT DIAMETER CARGO EXTRACTION PARACHUTE CLEANING AND DRYING | Up
TM-10-1670-277-23P Parachute Cargo Type: 28-Foot Diameter Cargo Extraction Parachute Assembly NSN 1670-00-040-8135 Manual | Next
RINSING EQUIPMENT IMMERSED IN SALT-WATER |
TM 10-1670-277-23&P 0008 00
0008 00-2
a. Dissolve one-half cup of dishwashing compound in one-gallon of warm water.
b. Rub soiled area with a clean cloth dampened with solution of dishwashing compound.
c. Rinse cleaned area by repeating rubbing process with a clean portion of cloth dampened with fresh,
clean water.
NOTE
Do not dry fabric items in direct sunlight or by laying an item on the
ground.
DRYING FABRIC ITEMS
Dry fabric items as follows:
1. Suspend or elevate item in a well-ventilated room or in a heated drying room.
2. Using electric circulating fans may reduce drying time.
3. When heat is used, the heat temperature shall not exceed 160 F (71 C). Preferred temperature is 140 F
(60 C).
CLEANING METAL ITEMS
Clean metal items as follows:
CAUTION
Use care not to damage the adjacent fabric materials.
1. Remove burrs, rough spots, rust or corrosion from metal items by filing with a metal file or by buffing and
polishing with abrasive cloth.
NOTE
Shield adjacent fabric material before spraying solid film lubricant.
2. Spray metal item with a solid film lubricant and allow to air dry for 24-hours.
|
