|
| |
Back
28-FOOT DIAMETER CARGO EXTRACTION PARACHUTE ASSEMBLING THE 28-FOOT DIAMETER CARGO EXTRACTION PARACHUTE | Up
TM-10-1670-277-23P Parachute Cargo Type: 28-Foot Diameter Cargo Extraction Parachute Assembly NSN 1670-00-040-8135 Manual | Next
MC1-1C/MC1-1D TROOP BACK PARACHUTE ASSEMBLY PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INTRODUCTION |
TM 10-1670-277-23&P 0004 00
0004 00-2
2. 28-Foot Diameter Extraction Parachute Packed for Standard Airdrop.
a. Cut a suitable length of 1-inch wide tubular nylon webbing for use as a bag retaining line.
b. Pass one end of the bag retaining line through the canopy vent loop (bridle loop) and center the line
length in the loop.
c. Align the webbing ends and pass the aligned ends into the bag mouth, through the inside of the bag,
and out of the bag end slot.
d. Position the end of the canopy vent loop (bridle loop) at the mouth of the deployment bag.
e. At the bag top, pass one running end of the retaining line over the top of the deployment bag bridle
straps and pass the opposite line running end under the bridle straps.
f.
Secure the webbing ends together above the bag bridle straps with a surgeon’s knot and a locking
knot. Make an overhand knot in each running end. The bag retaining line finished length shall
measure approximately the same as the length of the deployment bag.
END OF WORK PACKAGE
|
