Accomplishing a Log Record CONT.

TM 10-1670-277-23&P 0003 00 0003 00-8 f. Packer’s Name. The packer performing the initial pack, repack, or routine inspection, as applicable will sign this entry. g. Inspector’s Name. The inspector who has performed the pack-in-process inspection or routine inspection, as applicable, will sign this entry. NOTE A parachute log record that is completely filled out, lost, illegible, or in an otherwise unserviceable condition, will be replaced with a serviceable log record. 7. Replacing a filled out or unserviceable log record. a. Using a suitable blue or black marking device, enter NEW BOOK on the outside front cover of the replacement log record. b. Transcribe the information from the inside front cover of the original log record to the inside front cover of the replacement log record. If the original data is illegible or missing, use the canopy information data block to collect the required data. c. In the replacement log record; transcribe the initial and last entry made on the JUMP, INSPECTION, AND REPACK DATA page of the original log record. d. Transcribe all data from the remaining pages of the original log record to the appropriate pages of the replacement log record. e. After all original data has been transcribed, destroy the original log record. 8. Replacing a lost log record. NOTE Any time a log record is discovered missing from a parachute, a placement log record will be initiated during repack or inspection, as applicable. a. Using a suitable blue or black marking device, enter NEW BOOK at the top of the inside front cover of the replacement log record. b. Accomplish the log record inside front cover as detailed above. c. The age life of the canopy will be obtained from the date of manufacture or, if available, the date the canopy was placed into service as indicated on the canopy information data block. Enter the date placed in service (initial) and other applicable data on the JUMP, INSPECTION, AND REPACK DATA page of the log record as detailed above. Enter IN if date placed in service is known. If unknown, enter UNK.