|
| |
Back
PREPARING THE PARACHUTE FOR PROPER LAYOUT | Up
TM-10-1670-272-23P Parachute Personnel Type: 35-Foot Diameter MC1-1B Troop Back Parachute Assembly NSN 1670-00-598-0751 Manual | Next
REMOVING TURNS, TANGLES/TWISTS FROM SUSPENSION LINES |
TM 10-1670-272-23&P 0011 00
0011 00-8
1. Skirt inversion. Check to see that the vent cap is on the outside of the apex lines. If the vent cap is
on the inside of the apex lines, and the pocket bands are on the inside of the lower lateral band, the
canopy is inverted through the skirt. Remove an inversion through the skirt as follows:
NOTE
Be careful not to pass the apex out at the orifice, or around the
radial lines at the orifice.
a. Remove canopy from apex hook.
b. Pass apex down through the canopy and out the skirt between the two adjacent suspension lines.
|
