|
| |
Back
Table 2-1. Preventive Maintenance Checks and Services (PMCS) (CONT). | Up
TM-10-1670-271-23P Parachute Personnel Type: 35-Foot Diameter T-10B Troop Back Parachute Assembly NSN 1670-00-091-0720 Manual | Next
Shakeout and Airing |
ARMY TM 10-1670-271-23&P
AIR FORCE TO 14D1-2-464-2
MARINE CORPS TM 01136B-23&P/1
Table 2-1. Preventive Maintenance Checks and Services (PMCS) (CONT).
B - Before
D - During
A - After
Interval
Item
Item to be
no.
B
D
A
inspected
Procedures
06
·
·
Static Line (CONT)
Safety Pin. Inspect for rust, corrosion, breaks, and twist.
Safety Pin Lanyard. Inspect for proper ties, frays, thin spots
and breaks.
Section V. UNIT AND INTERMEDIATE MAINTENANCE PROCEDURES
Paragraph
Page
2-10
General Information .................................................................................. 2-15
2-11
Shakeout and Airing................................................................................... 2-16
2-12
Cleaning and Drying................................................................................... 2-18
2-13
Inspection .................................................................................................. 2-22
2-14
Acidity Test ............................................................................................... 2-24
2-15
Salt-Water Contamination Test ................................................................. 2-25
2-16
Packing the T-1 OB Parachute................................................................... 2-26
2-10. General Information. The following paragraphs contain general information pertinent to unit and
intermediate maintenance procedures:
a. Scope. This section contains maintenance procedures which are the responsibility of the specified
technician as authorized by the Maintenance Allocation Chart (MAC) and the Source, Maintenance and
Recoverability (SMR) coded Items that are identified in the Repair Parts and Special Tools Lists (RPSTL).
b. Maintenance Functions/Procedures. Each paragraph identifies a maintenance function specified in
the MAC All maintenance procedures required to complete a maintenance function are identified under “This
task covers:", in the order in which the work is most logically accomplished.
Change 2
2-15
|
