|
| |
Back
Table 2-1. Preventive Maintenance Checks and Services (PMCS) (CONT). | Up
TM-10-1670-271-23P Parachute Personnel Type: 35-Foot Diameter T-10B Troop Back Parachute Assembly NSN 1670-00-091-0720 Manual | Next
Section V. UNIT AND INTERMEDIATE MAINTENANCE PROCEDURES |
ARMY TM 10-1670-271-23&P
AIR FORCE TO 14D1-2-464-2
MARINE CORPS TM 01136B-23&P/1
2-9. PMCS Procedures (CONT)
Table 2-1. Preventive Maintenance Checks and Services (PMCS) (CONT).
B - Before
D - During
A - After
Interval
Item
Item to be
no.
B
D
A
inspected
Procedures
05
·
·
Deployment Bag
Side Flaps. Inspect for loose and broken stitching, (CONT)
holes, tears, burns or frays.
Locking Stow Panel. Inspect for loose and broken stitching,
holes, tears, burns or frays.
Locking Stow Loop Hoods. Inspect for loose or broken
stitching, holes, tears, burns or frays.
Closing & Locking Stow Loops. Inspect for loose or broken
stitching, holes, tears, burns or frays.
Suspension Line Protection Cover. Inspect for loose or
broken stitching, holes, tears, burns, frays, and Illegibility of
markings.
Cover Tiedown Loops. Inspect for loose or broken stitching,
holes, tears, burns or frays.
Connector Link Tie Loops. Inspect for loose or broken
stitching, holes, tears, burns, or frays.
06
·
·
Static Line
Webbing Inspect for loose or broken stitching, holes, tears,
burns, or frays.
Sleeve and Buffer. Inspect for loose or broken stitching,
holes, tears, burns, or frays. Inspect entire portion of static
line covered by sleeve.
Pack Opening Loop. Inspect for loose or broken stitching,
burns, tears, or frays.
Snap Hook. Inspect for proper operation, excessive wear,
rust, burrs, corrosion, cracks and verify that proper hole has
been drilled.
Change 2
2-14
|
