TM 10-1670-269-23&P    0007 00 0007 00-5/(6 Blank) Table 1.  Preventive Maintenance Checks and Services (PMCS) - Continued B – Before D – During A – After Interval Item No. B D A Item to be Inspected Procedures 05 Pack Tray Assembly, MIRPS (Continued)   Reserve Closing Loop Assembly.   Inspect for loose or broken stitching, cuts, and frays.   Ripcord Grip Pocket.  Inspect for loose or broken stitching, loss of elasticity, cuts and frays. Retainer Webbings.  Inspect for loose or broken stitching, loss of elasticity, cuts, and frays. Canopy Staging Flap Closing Loop.   Inspect for loose or broken stitching, holes, tears, and frays.    06 Ripcord Assembly Ripcord.  Inspect for rust, burns, and corrosion, rough spots, bent or missing or damaged locking pins, kinks, sharp bends, frays, breaks, or loose swages. 07 Ejector Spring Assembly Fabric.  Check for rips, burns, cuts, frays, tears, holes, thin spots, and loose or broken stitching. Spring.  Check of distorted or broken springs. END OF WORK PACKAGE