TM 10-1670-269-23&P    0007 00 0007 00-4 Table 1.  Preventive Maintenance Checks and Services (PMCS) - Continued B – Before D – During A – After Interval Item No. B D A Item to be Inspected Procedures 04 Pack Tray Assembly,   T-10R (Continued) Ripcord Grip Pocket.  Inspect for loose or broken stitching, and hand tacking, cuts and frays. Retainer Webbings.  Inspect for loose or broken stitching, loss of elasticity, cuts, and frays. Pack Fastener.  Inspect for loose or broken stitching, dents, rust, corrosion and burrs. Pilot Chute Protector Flap.  Inspect for loose or broken stitching and tacking, holes, tears, and breaks. Dressmaker’s Eye.  Inspect components for rust, corrosion, burrs, breaks and proper fitting. 05 Pack Tray Assembly, MIRPS Pack. Inspect for illegible markings.   Inspect all webbings, bindings, cloth duck for loose and broken stitching and tacking, holes, tears, burns, frays, and elastic retainers for elasticity.  All metal components for dents, rust corrosion, burrs, breaks, and proper fitting.  Pack stiffeners for bends and twist. Packing Open Bands.  Inspect for lose or broken stitching and tacking, holes, tears, breaks, loss of spring tension. Log Record Pocket.  Inspect for loose or broken stitching, cuts, burns, frays, and tears. Grommets.  Inspect components for rust, corrosion, burrs, breaks and proper fitting.