The MIRPS

TM 10-1670-269-23&P 0002 00 0002 00-7 The MIRPS. This pack tray has two parts, the main panel, and the end panel. The main panel forms a top flap and bottom flap, and the end panel forms a right end flap and a left end flap. A rectangular shaped metal pack frame is enclosed in a pocket formed in the bottom. Two holes with lift-the-dot snap fasteners are provided in the pack for the connector snaps, which are used for attaching the parachute to the primary parachute harness. A suspension line free bag deployment pouch is located on the inside of the container on the pack bottom. Canopy staging flaps are attached to the inside on the top and bottom flaps and provides for canopy retention. The MIRPS pack tray has a center pull ripcord grip location and contains soft loop closures vs. metal cones. OUTSIDE VIEW INSIDE VIEW Ripcord Protector Flap Canopy Staging Flap Top Side Flap Top Carrying Handle Soft Loop Grommets Right End Flap Left End Flap Pack Opening Spring Bands Bottom Side Flap Canopy Staging Flap Suspension Line Free Bag Deployment Pouch Grommets Main Panel Lift-the-Dot Fasteners End Flap Grommet