|
| |
Back
Disassembly of Outrigger Foot | Up
TM-10-1670-268-20P The Type V Airdrop Platform and Dual Airdrop Platform Manual | Next
TYPE V AND DUAL ROW AIRDROP PLATFORM PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INTRODUCTION |
TM 10-1670-268-20&P 0004 00
0004 00-31/(32 Blank)
f.
Disassembly of Link. Two personnel are required for this task.
(1)
Remove side rail bolts (numbers 31-36) and spacers.
(2)
Slide link from platform end, using a pry-bar if necessary to open the groove between the
platform rail and platform panel end fitting.
(3)
Replace side rail bolts and spacers.
(4)
Using a ¾-inch socket or wrench, re-tighten side rail bolts (numbers 27-36).
(5)
Repeat steps 1a. through 1f. for opposite outrigger mast.
END OF WORK PACKAGE
|
