Installation of Outrigger Foot

TM 10-1670-268-20&P 0004 00 0004 00-26 d. Repeat step 5 for opposite outrigger mast. 6. Installation of Outrigger Foot. Two personnel are required for this task. a. Position foot so handle is facing up and at far end of foot. b. Align holes of mast and foot, install shaft through both holes. c. Install quick release pin in the end of mast to secure shaft in place. d. Ensure lanyard is inside mast tube. 7. Temporarily securing Outrigger Masts in Place for Airdrop. Three personnel are required for this task. CAUTION Outrigger Masts cannot stand on their own. All personnel must stand clear of the path of the fall of the mast assemblies while securing outrigger masts. Failure to do so could cause personal injury. a. Two persons retract knob handles on link and rotate one mast assembly to its vertical position. (To unlock the mast assemblies, pull back on the knob handles on link and raise the mast assembly). b. One-person holds mast upright while two persons repeat above procedure with opposite mast. SHAFT HANDLE