TYPE V AND DUAL ROW AIRDROP PLATFORM ASSEMBLING THE TYPE V AND DUAL ROW AIRDROP PLATFORM

TM 10-1670-268-20&P 0004 00 TYPE V AND DUAL ROW AIRDROP PLATFORM ASSEMBLING THE TYPE V AND DUAL ROW AIRDROP PLATFORM 0004 00-1 THIS TASK COVERS: Assembly Disassembly INITIAL SETUP: Tools Bar, Pry, Crow or Wrecking (Item 1, WP 0020 00) Cord, Extension (Item 3, WP 0020 00) File, Mill (Item 7/8, WP 0020 00) File, Round (Item 9, WP 0020 00) Hammer, Ball Peen (Item 10, WP 0020 00) Handle, File (Item 11, WP 0020 00) Knife, Rigger (Item 13, WP 0020 00) Punch, Aligning (Item 15, WP 0020 00) Socket, ¾ -IN. (Item 17, WP 0020 00) Socket, ⁹/₁₆-IN. (Item 19, WP 0020 00) Tape, Measuring (Item 20, WP 0020 00) Wrench, Box and Open, ¾ - IN. (Item 23, WP 0020 00) Wrench, Box and Open, ¹¹/₁₆ - IN. (Item 25, WP 0020 00) Wrench, Box and Open, ¹⁵/₁₆-IN. (Item 26, WP 0020 00) Wrench, Box and Open, ⁵/₈-IN. (Item 27, WP 0020 00) Wrench, Box and Open, ⁹/₁₆-IN. (Item 28, WP 0020 00) Wrench, Impact, Pneumatic ½ -IN. (Item 30, WP 0020 00) Personnel Required Two, 92R (10) Parachute Rigger Material/Parts Tape, Adhesive, 2-IN. (Item 6, WP 0036 00) Thread, Cotton, 8/7 (Item 7, WP 0036 00) Webbing, Tiedown, CGU-1B (Item 8, WP 0036 00) Additional Equipment Forklift 3-foot Suspension Sling ASSEMBLY Assembling the major components. The basic assembly of the type V and dual row airdrop platform is achieved by systematically bolting the major components together. The major components of the type V airdrop platform consist of main panel assemblies, a rear panel assembly, roller pads and side rails. The major components of the dual row airdrop platform consist of panel assemblies, roller pads and side rails. NOTE Inspect all components for damage or wear. Burrs and sharp edges should be removed with a file. Damaged or bent parts should be removed and replaced. 1. Assemble the Type V Airdrop Platform as follows: a. Position all components as near as practical to the location where the platform is to be assembled. b. Start the screws two or three turns by hand.