COMMON TOOLS AND EQUIPMENT

TM 10-1670-268-20&P 0003 00 0003 00-2 Unpacking. Position all components as near as practical to the location where the platform is to be assembled. Removed and discard packing from the components. Checking Unpacked Equipment. When type V or dual row components are received from a designed supply source, parts shall be given an inspection (WP 0006 00) by the using unit prior to being placed into service. 1. Inspect the type V and dual row platform components for damage incurred during shipment. Report the damage on a DD Form 6, Packing improvement Report. Remove all assembly components from the containers and ensure that all items are accounted for and free of defects. Report damage or defects in accordance with DA PAM 738-750. 2. After the inspection is completed, the platform components can be stored or assembled for airdrop operations. COMMON TOOLS AND EQUIPMENT For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE) and the Table of Distribution and Allowances (TDA) applicable to your unit. The common hand tools required for assembly and repair of the type V and dual row platform are listed in WP 0020 00 of this manual. SPECIAL TOOLS AND EQUIPMENT No special tools or equipment are needed by organizational maintenance personnel to maintain the type V or dual row airdrop platform. Common tools are listed in WP 0020 00, table 2., of this manual. REPAIR PARTS Repair parts are listed in WPs 0021 00 through 0032 00 of this manual. END OF WORK PACKAGE