LOCATION AND DESCRIPTION OF MINOR COMPONENTS OF THE DUAL ROW AIRDROP PLATFORM

TM 10-1670-268-20&P 0002 00 0002 00-10 LOCATION AND DESCRIPTION OF MINOR COMPONENTS OF THE DUAL ROW AIRDROP PLATFORM These minor components are installed on the platform to accommodate specific modes of airdrop. Clevis Assembly. The clevis assembly is a round rod that is curved to fit over side rail bushing. It becomes a closed ring in shape when the spacer, bolt, washer and nut are installed across the open end of the clevis. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS OF THE OUTRIGGER ASSEMBLY Outrigger Assembly. The mast weighs approximately 80-lbs and is comprised of two components: (1) the outrigger mast assembly, and (2) the outrigger foot assembly. The outrigger mast and foot are pinned together by means of a removable pivot pin, and together make up the mast assembly. This assembly can be used on either side of the platform. The mast and the foot need to be disassembled for a two-person lift. The handle on the mast is at the center of balance and is designed to hold two hands. A second handling location is the end of the mast at the pivot pin end. The mast assembly is pinned to the Platform Fitting Assembly (PFA) by means of a removable pivot pin identical to that used to pin the foot to the mast. The outrigger hardware has been designed so that all hardware items can be used at either the right or left side of the platform. This hardware can also be installed on the Type V platform system, when modified to accept the PFA. 1 2 CLEVIS ASSEMBLY