SAFETY, CARE AND HANDLING

TM 10-1670-268-20&P 0001 00 0001 00-5/(6 Blank) LIST OF ACRONYMS AND ABBREVIATIONS - Continued TB Technical Bulletin TDR Transportation Discrepancy Report TMDE Test, Measurement and Diagnostic Equipment UOC Usable on Code WP Work Package SAFETY, CARE AND HANDLING The following subparagraphs summarize the safety, care and handling requirements for the type V and dual row platform assembly. The type V platform weighs approximately 100-pounds per foot of length. Use extreme caution in lifting and handling. The dual row platform weighs approximately 89-pounds per foot of length. Use extreme caution in lifting and handling. Safety. Use care in handling platforms as exposed metal parts could cause painful injuries. Never walk near or crawl beneath raised platforms. Do not use fingers to align bolt holes. Steel toe boots are highly recommended when working with the type V and dual row platforms and component parts. Care and Handling. Every effort shall be made to protect the platforms from weather elements, dust, dirt, oil, grease, and acid. When available, a building should be used to store platforms. Platforms will be stacked, utilizing dunnage, in a dry, well-ventilated location and protected from pilferage, dampness, fire and dirt. Be careful not to damage side rails. COMMON TOOLS AND EQUIPMENT For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE) applicable to your unit. SPECIAL TOOLS, TEST MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT EQUIPMENT Special tools, TMDE and support equipment are not required. REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) Repair parts are listed and illustrated in WP 0021 00 – WP 0032 00 of this manual. END OF WORK PACKAGE