Applying tension

TM 10-1670-265-12&P

T.O. 13C7-1-12

4-21. G-12E - SERVICE (Cont)

4-21

PACKING (Cont.)

Applying tension.

Reconnect the canopy bridle loop to the stationary post.

Insure that the two risers are attached to the body of a 3/4-inch shackle (clevis) and the applicable nut and

screw are installed on the clevis.

Connect the 3/4-inch clevis to a tension device and apply tension.

NOTE

A tension jack, chain hoist, power winch, or a vehicle may be used as a tension device when

applying tension to the parachute canopy.

GO TO NEXT PAGE

4-49