ASPSU - Service

TM 10-1670-265-12&P

T.O. 13C7-1-21

4-19. ASPSU - Service

4-19

This task covers: Cleaning

INITIAL SETUP

Personnel Required:

4SE (10) parachute rigger

Tools:

Brush, scrub, household NSN 7920400-282-2470

Reference Information:

TM 10-1670-201-23 T.O. 13C-1-41

Materials:

Paper clip - item 6, Appendix D

NOTE:

Rag, wiping - item 3, Appendix D

The instructions pertain to the functional group

number sequence 02 in the MAC and RPSTL.

CLEANING

General. Cleaning should be held to a minimum and performed only when it is necessary to eliminate a possible

malfunction or material deterioration.

Cleaning. The cleaning procedures are as follows:

Brushing. Gently brush with a soft-bristle brush.

Spot-cleaning. Spot-clean by rubbing the soiled area with a clean damp rag (Item 3, Appendix D).

Drying. Dry the ASPSU surface with a clean rag.

Cleaning the pressure release port. In the event that mud or other foreign objects are blocking the pressure

release port, clean as follows:

(1)

Hold the ASPSU with the port opening facing down

CAUTION

Damage can occur to the bellows if items used to clear the port are inserted into the port hole

more than 3/8 inch.

(2)

Clear the port hole of mud or foreign objects using a paper clip (item 6, Appendix D), or another

suitable item.

END OF TASK

4-42