Section VII. MAINTENANCE PROCEDURES FOR ALTITUDE SENSOR PARACHUTE STAGING UNIT (ASPSU)

TM 10-1670-265-12&P

T.O. 13C7-1-21

SECTION VII.

MAINTENANCE PROCEDURES FOR ALTITUDE

SENSOR PARACHUTE STAGING UNIT (ASPSU)

4-16. ASPSU - Inspect

4-16

This task covers: Inspection

INITIAL SETUP

Personnel Required:

43E (10) Parachute rigger

Equipment Condition:

Para. 4-8 Sensor and cutter assembled.

NOTE:

The instructions pertain to the functional group number sequence 02 in the MAC and RPSTL.

INSPECTION

1. Insure that the cutter mechanism has not been fired.

(You should not be able to see the blade.)

2. Insure that the four captive screws are tight.

3. Insure that the safety tag and pin assembly is

securely attached.

4. Inspect for dents, cracks, or foreign material.

END OF TASK

4-13