Section VI: MAINTENANCE PROCEDURES FOR 57-FOOT-LONG CENTER LINE

TM 10-1670-265-12&P

T.O. 13C7-1-21

SECTION VI.

MAINTENANCE PROCEDURES FOR 57-FOOT-LONG CENTER LINE

4-12. Center line - Inspect.

4-12

This task covers: Inspection

INITIAL SETUP

NOTE

Personnel Required:

The instructions pertain to the functional group

43E (10) parachute rigger

number sequence 01 in the MAC and the RPSTL.

Reference Information:

TM 10-1670-201-23 T.O. 13C-1-41

INSPECTION

1. Foreign material and stains inspection. Inspect for the presence of dirt or similar type foreign material. Also check for

evidence of mildew, moisture, oil, grease, pitch, resin, or contamination by salt water.

2. Detailed inspection. Inspect for breaks, burns, cuts, frays, holes, snags, tears, incorrect weaving, and sharp edges

formed from searing; loose missing or broken stitching, tacking, whipping, and weaving; weak spots, wear, and

deterioration.

END OF TASK

4-5