Parachute harness log record.

TM 10-1670-201-23

T.O. 13C-1-41

NAVAIR 13-1-17

1. Type of repair. As applicable,

enter the term "INITIAL INSPECTION". the type of

repair or the number of the technical bulletin (TB) which

prescribes a one-time inspection.

2. Inspected by. The individual

who performed the initial inspection, inspection after

repair, or one-time inspection, as applicable, will sign

this entry with his last name only.

3. Unit. Enter the designation of

the unit which performed an inspection or the repair.

4. Date.

Enter the date (day,

month, and year 1 the applicable type inspection was

completed.

(e) Note page. A page is provided at

the back of a parachute log record to accommodate

recording of additional data pertinent to the

serviceability of a parachute canopy assembly (fig. 16).

Figure 1-7. Inside front cover entries for a

parachute harness log record, typical

1. Serial number. Enter the word

"NONE" for all harnesses except the harness used with

the MK-J5 ejection seat personnel parachute system. In

an MK-J5 harness log record, enter the harness serial

number obtained from the harness vest.

2. Type.

Enter the type of

parachute the harness is used with.

3. Part number. Enter the part

number of the harness.

4. Date of manufacture. Enter the

month and year the harness was manufactured.

5. Manufacturer. Enter the name

of the harness manufacturer.

Figure 1-6. Data entries for a log record note page,

6. Contract number. Delete the

typical

word "CANOPY" in the entry block title and enter

(2) Parachute harness log record.

contract number under which the harness was

manufactured.

(a) Inside front cover.

Using the

information furnished on the identification label of the

7. Station and unit.

Enter the

harness, make the following entries on the inside of the

name of the station and the unit to which the parachute

front cover of the log record (fig. 1-7). Entries may be

harness is currently assigned. Should the harness be

continued on the inside of the back cover, if required.

Should the identification label be missing, the date of

manufacture will be obtained from the harness

hardware.

1-6