Figure 1-2. Parachute log record entries for the inside front and back covers, typical

TM 10-1670-201-23

T.O. 13C-1-41

NAVAIR 13-1-17

2. Type. Enter the parachute type.

3. Part number. Enter the part

number of the parachute canopy.

4. Date of manufacture. Enter the

month and year the parachute canopy was

manufactured.

5. Manufacturer. Enter the name

of the parachute canopy manufacturer.

6. Canopy contract number. Enter

the entire contract number specified for the parachute

canopy.

7. Station and unit.

Enter the

name of the station and unit to which the parachute

canopy is currently assigned. When a parachute is

transferred permanently to another station and / or unit,

the original entry will be lined out and the name of the

receiving station and / or unit will be entered.

8. At top of notes page located in

back of book enter: Placed in service: (enter month and

year that the item was placed into service).

NOTE

Record only the 30 day routine

inspection for emergency type

parachutes.

Other

routine

inspections according to paragraph

2-15 need not be recorded.

(b) Jump, inspection, and repack data

page. Beginning with the initial packing of a parachute

and each time a parachute is repacked or administered

a routine inspection, make the applicable entries on the

"JUMP, INSPECTION, AND REPACK DATA" page of

the log record (fig. 1-31 as follows:

Figure 1-3. Log record entries for the jump.

inspection. And repack data page. typical

Figure 1-2. Parachute log record entries for the

inside front and back covers, typical

Change 4

1-4