Maintenance Instructions

MWO 10-1670-293-20-2

c. Maintenance Instructions

The various Maintenance Levels are as follows:

(1) "C"--Operator or crew maintenance

(2) "O"--Unit maintenance

Table 5. Maintenance Allocation Chart for Harness Assembly

Components/Assembly

Maintenance

Maintenance Level

Tools/Equipment

Function

"C"-

"O"-Organization

Operator

Harness, Assembly

Repair

0.5

See Section 9 in

this MWO

Replace

0.4

See Section 9 in

this MWO

Maintenance Level Column

The work time figure represents the average time required to restore an item (assembly,

subassembly or component) to a serviceable condition under typical field operating conditions.

Tools/Equipment Column

See Section 9, Special Tools, Tool Kits, Jigs, Test, Measurement And Diagnostic Equipment

(TMDE), and Fixtures Required, in this MWO.

11. CALIBRATION REQUIRED. N/A.

12. WEIGHT AND BALANCE DATA. N/A.

13. QUALITY ASSURANCE REQUIREMENTS. Qualified personnel will accomplish inspection of

the completed MWO application for full compliance with the technical requirements of the

instructions.

14. RECORDING AND REPORTING OF THE MODIFICATION RECORDS AND REPORT

FORMS.

a. Records and reports. The organization responsible for MWO application will report

application information as follows:

MWO application information can be input directly into the Modification Management

Information System (MMIS) over the Internet. Entry into the MMIS system is password protected.

New users can register on-line at https//www.mmis.army.mil. Passwords are normally approved

and issued within 48 hours.